Home / Blog / Flush Doors
Flush Doors
Why Doors Warp, and How to Prevent It

Doors warp mainly because moisture enters one face or edge more than the other, or because the core is weak and uneven. A dense, stable core, waterproof bonding, both faces finished and all edges sealed are the best ways to keep a door straight.
Common causes
- Uneven finishing: laminate or paint on only one face makes the door pull towards one side as humidity changes.
- Unsealed edges: the top and bottom edges are often left bare, letting moisture in.
- Weak or uneven core: low density or gappy cores bend under their own weight.
- Water exposure: bathroom and kitchen doors absorb moisture from wet floors.
- Poor storage on site: doors leaned against walls or left in wet cement areas bend before they are even hung.
- Too few hinges: tall or heavy doors need extra hinges.
How to prevent it
- Choose a stable core. Royale Touche flush doors use a dual core of high density southern yellow pine, giving a flat surface with no waviness. Shutter flatness is tested to within 1 mm.
- Choose BWP bonding. Phenolic resin bonding keeps layers together even when wet.
- Finish both faces with the same or equivalent material.
- Seal all four edges, including the top and bottom.
- Store doors flat on a level surface, indoors and dry, until they are hung.
- Use enough hinges: three for standard doors, four for tall or heavy doors.
- Leave a small gap at the bottom of bathroom doors so they do not sit in water.
Fixing a door that sticks
Sometimes a door sticks because hinges have loosened, not because it has warped. Tighten hinge screws first. If the door has swelled, let it dry fully before planing, and then seal the planed edge.
Monsoon tip
During Coimbatore's monsoon, a door that sticks slightly may ease once the weather dries. Avoid planing it during the wettest weeks.
See specifications on our flush doors page.
Frequently asked questions
Why does my door stick only in the rainy season?
Unsealed edges absorb moisture and swell. Seal all edges once the door dries.
Can a warped door be straightened?
Minor bends sometimes ease when moisture balances, but a badly warped door usually needs replacing.
Have a question about flush doors? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.
Jay Trading Company

