Home / Blog / Flush Doors
Flush Doors
What Is Inside a Flush Door, and Why It Matters

A flush door is a flat door made of a wooden frame filled with a solid core, covered on both faces with veneers and bonded under pressure. What is inside decides whether the door stays flat and strong for decades or warps, sags and lets termites in within a few years.
From the outside, most flush doors look the same. That is why it pays to know what to ask.
The core
The core fills the inside of the door. Cheap doors use low density fillers, short wood pieces or even hollow sections. A good core is dense, uniform and stable.
Royale Touche flush doors use a dual core of 100% high density southern yellow pine imported from the US. The dual core gives a flat, smooth surface with no waviness.
The frame and battens
Around the core is a frame of stiles and rails. Royale Touche uses a 75 mm pine frame and battens, which give hinges and screws something solid to hold.
The lock rail
A lock rail is a solid block where the lock is fitted. Without it, the lock is fixed into weak core material and can loosen. Royale Touche doors have a lock rail on both sides, so the door can be hung either way.
Face veneers
The faces are covered with veneers. Royale Touche uses 100% Gurjan face veneers, a strong hardwood that gives a smooth base for laminate, veneer or paint.
The glue
Everything is bonded with phenolic resin, the same waterproof bonding used in BWP plywood. This makes the doors boiling waterproof (BWP), suitable for bathrooms.
Treatment
The timber goes through a four tier preservative treatment to protect against termites and borers.
Questions to ask any supplier
- What is the core made of?
- Is there a lock rail, and on which side?
- What are the face veneers?
- Is the door BWP or only BWR?
- Is it termite treated, and what warranty does it carry?
Royale Touche flush doors carry a lifetime warranty. See the build and prices per sq.ft on our flush doors page.
Frequently asked questions
What core is best for a flush door?
A dense, uniform solid core such as high density pine gives a flat, strong, stable door.
Why does a flush door need a lock rail?
It gives the lock a solid block of wood to fix into, so it does not loosen.
Have a question about flush doors? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.
Jay Trading Company

