WhatsApp us

Home / Blog / Flush Doors

Flush Doors

The Best Flush Door for Bathrooms: BWP vs BWR

· 2 min read

Flush door suitable for bathrooms

The best flush door for a bathroom is a BWP (boiling waterproof) door, bonded with phenolic resin, with all edges sealed and a proper finish on both faces. BWR doors are only water resistant and often swell and peel at the bottom within a few years in a wet bathroom.

Why bathroom doors fail

  • Water splashes onto the door, especially at the bottom.
  • Wet floors keep the bottom edge damp every day.
  • Steam from hot showers soaks into unsealed edges.
  • Cleaning chemicals wear away the finish.

The bottom edge is almost always where the trouble starts.

BWR vs BWP

BWR means boiling water resistant. It tolerates some moisture but is not designed for constant wetting.

BWP means boiling waterproof. It is bonded with phenolic resin so the layers do not separate when wet. Royale Touche flush doors are BWP, which makes them suitable for bathrooms and damp areas. Many other flush doors are only BWR.

Finishing a bathroom door

  1. Seal all six faces: both faces and all four edges, including the top and bottom.
  2. Use laminate on both faces for the best water resistance, with matching edge banding.
  3. If painting or polishing, use a durable PU or enamel and coat the edges well.
  4. Fit an aluminium or stainless steel strip at the bottom edge for extra protection.

Fitting tips

  • Keep a small gap at the bottom so the door does not sit in water.
  • Make sure the bathroom floor slopes towards the drain, away from the door.
  • Use stainless steel hinges and fittings that will not rust.

Thickness

30 to 32 mm suits most bathroom doors.

Termite protection

Bathrooms are damp, which attracts termites. Royale Touche doors go through a four tier preservative treatment against termites and borers, and carry a lifetime warranty.

See the specifications and prices per sq.ft on our flush doors page.

Frequently asked questions

Can a flush door be used in a bathroom?

Yes, if it is BWP grade and properly sealed on all faces and edges.

Why does the bottom of my bathroom door peel?

Water reaches the unsealed bottom edge. Use a BWP door and seal all edges.

Have a question about flush doors? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.

Keep reading

More on flush doors.

Visit us

See flush doors at our Coimbatore showroom.

Bring your plans or a few photos of your space and we will walk you through the options.

Address
Jay Trading Company
#1050 Mettupalayam Road
Near Chintamani Signal
Coimbatore 641002
Hours
Monday to Saturday
10 AM to 7:30 PM
Closed on Sunday
Call
+91 99524 01742
+91 94425 94103
Catalogue
All 2026 catalogues