WhatsApp us

Home / Blog / Flush Doors

Flush Doors

How to Measure for a New Door, and How Door Pricing Works

· 2 min read

Measuring a door opening

To order a new flush door, measure the width and height of the door frame opening where the shutter will sit, at the top, middle and bottom, and use the smallest figure. Flush doors are priced per sq.ft of the shutter, so multiply the shutter width by height in feet to get the area.

Measuring the opening

  1. Width: measure inside the frame, between the rebates, at the top, middle and bottom.
  2. Height: measure from the floor, or the finished floor level, to the top of the frame rebate, on the left and right.
  3. Use the smallest measurement for each.
  4. Note the thickness of the frame rebate, which decides the door thickness.
  5. Note which side the hinges are on and which way the door opens.

If flooring is still to be laid, account for its finished height.

Common door sizes

DoorTypical size
Bathroom6.5 to 7 ft x 2.5 ft
Bedroom7 ft x 3 ft
Main door in apartments7 ft x 3 to 3.5 ft

Always measure your own openings, since sites vary.

How per sq.ft pricing works

The area of the shutter in sq.ft is width x height in feet. For example:

  • A 7 x 3 ft door is 21 sq.ft.
  • A 7 x 2.5 ft door is 17.5 sq.ft.
  • A 7 x 3.5 ft door is 24.5 sq.ft.

Multiply the area by the rate for your chosen thickness. The flush doors page has an estimator that does this for you, with current rates for each thickness.

Ordering for a whole home

Make a list of every door with its room, size, thickness and hinge side. Send it to us on WhatsApp and we will quote for the full set.

Before fitting

Store doors flat and dry, finish both faces and seal all edges before they are hung.

Frequently asked questions

How do I calculate the sq.ft of a door?

Multiply the shutter width by its height in feet. A 7 x 3 ft door is 21 sq.ft.

Should I measure the frame or the old door?

Measure the frame opening, at several points, and use the smallest figure.

Have a question about flush doors? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.

Keep reading

More on flush doors.

Visit us

See flush doors at our Coimbatore showroom.

Bring your plans or a few photos of your space and we will walk you through the options.

Address
Jay Trading Company
#1050 Mettupalayam Road
Near Chintamani Signal
Coimbatore 641002
Hours
Monday to Saturday
10 AM to 7:30 PM
Closed on Sunday
Call
+91 99524 01742
+91 94425 94103
Catalogue
All 2026 catalogues