Home / Blog / Flush Doors
Flush Doors
Flush Door Care: Hinges, Locks and Everyday Maintenance

A good flush door needs very little care: keep hinges and lock screws tight, clean the finish gently, keep the bottom edge dry, and fix small chips in edge banding before moisture gets in. Most door problems come from fitting and hardware, not from the door itself.
Fitting the hardware properly
- Hinges: use three hinges on standard doors and four on tall or heavy doors. Screw them into the solid frame, not the core.
- Locks: fit the lock into the lock rail. Royale Touche flush doors have a lock rail on both sides, so the lock always goes into solid timber whichever way the door is hung.
- Screws: use the right length and gauge, and pilot drill to avoid splitting.
- Door closers and stoppers: a stopper prevents the handle from hitting the wall and the door from straining its hinges.
Everyday cleaning
- Laminate: wipe with a damp cloth and mild soap.
- Veneer: dust with a dry cloth, wipe marks with a lightly damp cloth and dry at once.
- Paint: wipe gently, avoiding harsh chemicals.
Keeping damp away
- Keep bathroom floors sloping away from the door.
- Wipe water off the bottom of bathroom doors.
- Make sure all edges are sealed.
Small repairs
- Loose hinge: tighten screws. If the holes are stripped, use longer screws into the frame.
- Sagging door: check the top hinge first. Add a hinge on heavy doors.
- Chipped edge band: repair promptly to keep moisture out.
- Squeaky hinges: a drop of light oil on the hinge pin.
Once a year
Check hinges, lock screws and the bottom edge of every door, especially before the monsoon.
Warranty
Royale Touche flush doors carry a lifetime warranty. Keep your bill. See specifications on our flush doors page.
Frequently asked questions
How many hinges should a flush door have?
Three for a standard door and four for tall or heavy doors.
Why is my door sagging?
Usually the top hinge has loosened. Tighten or replace the screws, and add a hinge on heavy doors.
Have a question about flush doors? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.
Jay Trading Company

