WhatsApp us

Home / Blog / Solid Acrylic

Solid Acrylic

Why Acrylic Edges Matter in a Kitchen

· 2 min read

Edge of a solid acrylic shutter

Edges are where a kitchen shows its quality first. With solid acrylic, the colour runs through the full 2 mm sheet, so edges look the same as the face, without a visible line or a different colour underneath.

The problem with ordinary edges

On many shutters, the face is a thin coloured layer on a different base. Where the shutter is cut, the base can show, so it must be covered with edge banding. Over time, edge bands can:

  • show a visible line where they meet the face
  • change colour differently from the shutter
  • lift or chip, letting moisture into the board

What through and through means

Royale Touche solid acrylic is coloured through its full thickness, rather than having a thin coloured film on a PVC base. A cut edge, a chipped corner or a scratch shows the same colour.

Edge banding still matters

Shutters are made of a board core with acrylic on the face, so the board edge still needs to be sealed. Ask your carpenter to:

  1. Use matching edge banding of good quality, ideally in the same colour and finish.
  2. Seal all four edges, including the hidden top and bottom edges.
  3. Use proper edge banding machines or careful hand finishing.
  4. Pay special attention to the sink unit and bottom edges near the floor.

Corners and handles

Rounded or slightly softened corners resist chipping better than sharp ones. If you use profile handles, make sure the profile is fixed properly so it protects the edge.

The core matters too

Behind the acrylic, use BWP plywood or a quality board for the shutter core, so the edges stay sound even in a damp kitchen. See our plywood page.

See the solid acrylic colours and finishes on our solid acrylic page.

Frequently asked questions

Do acrylic shutters need edge banding?

Yes. The board edge must be sealed. Use matching edge banding on all four edges.

What thickness is Royale Touche acrylic?

It is a 2 mm co extruded sheet with colour through its full thickness.

Have a question about solid acrylic? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.

Keep reading

More on solid acrylic.

Visit us

See solid acrylic at our Coimbatore showroom.

Bring your plans or a few photos of your space and we will walk you through the options.

Address
Jay Trading Company
#1050 Mettupalayam Road
Near Chintamani Signal
Coimbatore 641002
Hours
Monday to Saturday
10 AM to 7:30 PM
Closed on Sunday
Call
+91 99524 01742
+91 94425 94103
Catalogue
All 2026 catalogues