
For most home furniture, use 19 mm plywood for the main structure, 6 to 9 mm for back panels and drawer bottoms, and 12 to 16 mm for internal partitions and light shelves. Use 25 mm where extra strength is needed, such as heavy shelves, worktop bases and bed frames.
Royale Touche plywood comes in 6, 9, 12, 16, 19 and 25 mm, so you can match each part to the job.
Thickness guide by use
| Thickness | Common uses |
|---|---|
| 6 mm | Back panels, drawer bottoms, cladding over walls |
| 9 mm | Wardrobe and cabinet backs, ceiling panels, drawer sides |
| 12 mm | Internal partitions, light shelves, drawer boxes |
| 16 mm | Shelves, partitions, light cabinets |
| 19 mm | Wardrobe and kitchen carcasses, shutters, TV units, beds |
| 25 mm | Heavy shelves, bed frames, counter bases, study tables |
Kitchens
Use 19 mm BWP plywood for the base and wall cabinet carcasses. The sink unit takes the most moisture, so make sure it is BWP grade. Shutters are often 19 mm plywood or blockboard, finished in laminate or acrylic.
Wardrobes
Use 19 mm for the sides, top, bottom and shutters, and 6 or 9 mm for the back. Long shelves are better in 19 or 25 mm blockboard so they do not sag.
Beds
Use 19 or 25 mm for the frame and headboard, and 12 to 19 mm for the base boards under the mattress.
Wall panelling and ceilings
Use 6 to 12 mm, depending on the finish and the framework behind it.
Why thickness matters
- Strength: thicker sheets carry more weight without bending.
- Screw holding: 19 mm gives screws enough material to hold, especially in hinges and drawer channels.
- Long life: a cabinet built in thin sheets may look fine on day one and sag within a few years.
A word on cost
Using 16 mm instead of 19 mm for carcasses saves a little money but weakens hinges and joints. It is rarely worth it in kitchens and wardrobes you will use every day.
Every Royale Touche thickness is BWP grade, termite treated and E0 certified. See specifications and prices on our plywood page.
Frequently asked questions
What thickness of plywood is best for a wardrobe?
Use 19 mm for the structure and shutters and 6 or 9 mm for the back panel.
Is 12 mm plywood strong enough for kitchen cabinets?
Not for the main carcass. Use 19 mm for the cabinet body and 12 mm only for light partitions.
Have a question about plywood? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.
Jay Trading Company

