
Before you buy plywood for your home, check the grade, the IS standard, the thickness, termite treatment, emission rating, warranty and the bill. Plywood is hidden inside every cabinet once the work is done, so these checks are your only chance to make sure you are getting what you pay for.
The checklist
- Grade: BWP for kitchens, bathrooms and damp areas. Ideally BWP throughout.
- Standard: look for IS:710 for marine grade plywood.
- Thickness: measure a few sheets. 19 mm should be close to 19 mm.
- Termite and borer treatment: through all layers, not just the surface.
- Emissions: E0 is the safest for bedrooms and kitchens.
- Fire retardancy: IS:5509 adds safety, especially near kitchens and wiring.
- Identity mark: genuine Royale Touche plywood has a red layer in its core.
- Warranty: ask what it covers and for how long. Royale Touche carries a lifetime warranty.
- Bill: always take a proper bill with the brand, grade and thickness. Your warranty depends on it.
- Supplier: buy from a showroom you can visit again.
On site
Good plywood can still be spoiled on site. Ask your contractor to:
- Stack sheets flat on a level base, off the floor, never leaning against a wall.
- Keep them indoors and covered, away from rain, wet cement and plaster work.
- Seal all cut edges promptly with edge banding or laminate.
- Finish plastering, painting first coats and floor work before interiors start where possible.
Questions to ask your carpenter
- Which grade and thickness will you use for each part?
- Will the sink unit and bathroom vanity be in BWP?
- How will edges be sealed?
- Can I see the sheets and the bill before work starts?
Why one grade helps
Royale Touche makes one grade only: BWP marine grade to IS:710, termite treated, fire retardant to IS:5509 and CARB certified E0. That makes the checklist simpler, because every sheet meets every point.
Visit our showroom in Coimbatore, near Chintamani Signal, to see the sheets and the red core for yourself, or see specifications and prices on our plywood page.
Frequently asked questions
How do I know my carpenter used the plywood I paid for?
See the sheets and the bill before work starts, check the red core on the edges, and keep an offcut from each lot.
Should plywood be stored flat?
Yes. Store it flat on a level base, off the floor, indoors and away from water.
Have a question about plywood? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.
Jay Trading Company

