Home / Blog / Metal Cladding
Metal Cladding
How to Maintain Metal Cladding

Metal cladding needs very little maintenance. Rinse it with water now and then to remove dust, check trims and edges once a year, and avoid harsh cleaners and abrasive tools. There is no painting, polishing or oiling to do.
Routine cleaning
- Rinse with clean water, using a hose or a soft brush on a pole.
- For stubborn dirt, use mild soap and water, then rinse.
- Clean from top to bottom.
How often
| Location | Suggested cleaning |
|---|---|
| Main road or dusty area | Every few months |
| Residential street | Once or twice a year |
| Interiors | Wipe as needed |
The monsoon naturally rinses exterior cladding, so a clean after the rains often keeps it looking fresh.
What to avoid
- Wire brushes, scrubbers and abrasive powders
- Strong solvents, thinner and acid cleaners
- High pressure washers held too close to joints and trims
- Leaning ladders directly on the cladding without padding
Annual check
- Look for loose trims at corners, windows and the top edge.
- Check that drainage around the base is clear.
- Look for any dents or damage from impacts.
- Check sealing around windows and penetrations.
After other work
When painters, electricians or plumbers work near the cladding, make sure metal filings from drilling are cleaned off, as they can rust and leave stains.
Repairs
Because cladding is fixed with hidden screws on a frame, damaged sheets can often be removed and replaced. Talk to your installer.
See designs and specifications on our Luxclad page.
Frequently asked questions
Does metal cladding need painting?
No. It is factory coated and needs only occasional rinsing.
Can a damaged cladding sheet be replaced?
Often yes, because sheets fix to a frame. Ask your installer.
Have a question about metal cladding? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.
Jay Trading Company

