Home / Blog / Metal Cladding
Metal Cladding
How Metal Wall Cladding Is Installed

Exterior metal cladding is fixed to a light metal frame on the outside of your wall, not stuck to the wall itself. Sheets start at the bottom on a starter trim, lock into each other, and are screwed to the frame through their edge, so the next sheet covers the screws. Trims finish corners, windows and the top.
Measurement and installation are done by your own installer or contractor. Here is what to expect.
1. Measure the site
The installer measures the walls, windows and corners, and works out the sheets and trims needed.
2. Fix the frame
A metal frame is anchored to the wall and set level, so the cladding sits straight even if the wall is not. This also creates an air gap behind the cladding, which helps the wall stay dry and cooler.
3. Add insulation, if chosen
For Plank Clad with XLPE insulation, the foam is fitted behind each plank.
4. Start at the bottom
A starter trim is fixed at the base, and the first sheet sits on it.
5. Lock and screw
Each sheet locks into the one below and is screwed to the frame through its edge. The next sheet covers those screws, so the finished face shows no screw heads.
6. Finish the edges
Corner, window and top trims close every edge, keep out rain and give a clean finish.
Why this method works
- Any wall: brick, block, concrete or a steel structure
- Clean and quick: a dry fix with no plastering
- Easy to service: sheets can be removed and refitted if work is needed behind them
- Rain tight: interlocking joints and trims shed water away from the wall
Questions to ask your installer
- What frame material and spacing will be used?
- How will window edges and corners be trimmed?
- Will there be a ventilated air gap?
- Will insulation be fitted on sunny walls?
See profiles, designs and prices on our Luxclad page.
Frequently asked questions
Is metal cladding stuck to the wall?
No. It is fixed to a metal frame on the wall, leaving an air gap behind.
Are the screws visible?
No. Each sheet covers the screws of the one below.
Have a question about metal cladding? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.
Jay Trading Company

