Home / Blog / Designer Panels
Designer Panels
How Fluted Wall Panels Are Installed

Divino panels are fixed by your carpenter or interior team onto horizontal wooden battens or aluminium pipes. Each panel is screwed along its groove edge, and the next panel's tongue slots in over the screws, hiding them. You do not need plywood behind the panels.
What you need
- Horizontal wooden battens or aluminium pipes fixed to the wall
- Divino panels cut to the wall height
- Screws
- End profiles, corner profiles and matching flat panels for finishing
Step by step
- Check the wall: it should be dry, sound and reasonably level. Fix any damp before starting.
- Fix the battens or pipes: horizontal runs at regular spacing up the wall, fixed securely into the wall.
- Plan the layout: decide where the first panel starts so the last panel finishes neatly, and plan cut outs for switches and sockets.
- Fix the first panel: fit an end profile, then the first panel, level and plumb.
- Screw on the groove edge: each panel is screwed to the battens through its groove edge.
- Slot in the next panel: its tongue covers the screws of the previous panel.
- Finish the edges: end profiles cap open edges, and corner profiles finish outside corners.
Why no plywood
Because the panels are strong enough to span between battens or pipes, there is no need for a full plywood backing. That saves time, material and cost.
Cables and lights
The space behind the panels can carry cables for the TV and lights. Plan points before the panels go up.
Where not to install
Keep panels indoors and in vertical applications. Avoid direct sunlight, standing water, and heat sources such as hobs and ovens.
Who installs
Your carpenter or interior team fixes the panels. We can guide them on the method and accessories. See details and accessories on our Divino panels page.
Frequently asked questions
Do fluted panels need plywood behind them?
No. Divino panels can be fixed straight onto horizontal battens or aluminium pipes.
Who installs Divino panels?
Your carpenter or interior team fixes them, following the batten and screw method.
Have a question about designer panels? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.
Jay Trading Company

