
The best plywood for kitchen cabinets is BWP marine grade plywood in 19 mm thickness, termite treated and low in emissions. The kitchen is the hardest working room in an Indian home, with water, steam, heat and daily cleaning, so the cabinet material matters more here than anywhere else.
Why kitchens are hard on plywood
- Water splashes around the sink and dish rack every day.
- Steam from cooking rises into wall cabinets.
- Floors are mopped daily, wetting the base of every unit.
- Leaks under the sink can go unnoticed for weeks.
- Termites and cockroaches look for dark, damp corners.
What to look for
- BWP grade to IS:710. Bonded with phenolic resin, it does not delaminate when wet. Royale Touche plywood uses 100% BWP grade phenolic resin and holds up through 120 hours of boiling water testing.
- 19 mm for carcasses. Strong enough for hinges, drawer channels and heavy granite above.
- Termite and borer treatment through all layers, not just the surface.
- E0 emissions, because food is stored and prepared here.
- Fire retardant, for the area around the hob.
The sink unit
This is where kitchens fail first. Use BWP plywood, seal every edge, and ask your plumber to fit a leak proof sink and good quality connections. A sheet of aluminium or a waterproof liner at the base of the sink unit adds protection.
Edges and finishes
Raw plywood edges absorb moisture. Make sure every cut edge is sealed with edge banding or laminate. For shutters, popular finishes include laminate, solid acrylic for a high gloss or matt look, and veneer for a natural wood finish.
Kitchens in Coimbatore and the hills
Kitchens in Coimbatore face steam and monsoon damp. In Ooty, Coonoor and Kotagiri the air is damp most of the year. In both, BWP plywood is the sensible minimum.
One grade, no confusion
Royale Touche makes one grade only, BWP marine grade, so there is no risk of a cheaper grade slipping into your kitchen. It carries a lifetime warranty. See specifications and prices on our plywood page.
Frequently asked questions
Is BWR plywood good enough for a kitchen?
BWR is a compromise. BWP is the safer choice, especially for the sink unit and base cabinets.
What thickness is best for kitchen cabinets?
19 mm for the carcass and shutters, and 6 or 9 mm for back panels.
Have a question about plywood? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.
Jay Trading Company

