
A 10 x 4 ft veneer sheet lets you panel a wall or wardrobe from floor to ceiling in one piece, without a horizontal joint, in most homes. Use 8 x 4 ft sheets for doors, furniture and panels up to about 8 ft high.
Royale Touche Luxe Veneers come as 4 mm sheets in both sizes: 8 x 4 ft and 10 x 4 ft.
Why joints matter
On a tall wall, an 8 x 4 ft sheet leaves you with a horizontal joint where a second piece is added on top. Even when carefully done, the grain changes at the joint and the eye catches the line. On veneer, where the beauty is in the continuous grain, that line is especially visible.
Typical ceiling heights
Most apartments and homes in Coimbatore have ceiling heights around 10 ft, with false ceilings sometimes bringing it down slightly. A 10 x 4 ft sheet covers this in one piece.
When to use 10 x 4 ft
- Floor to ceiling TV and headboard walls
- Full height wardrobes and walk in wardrobe fronts
- Tall doors and pivot doors
- Double height lobbies, using the longer sheet to reduce the number of joints
- Reception walls in offices and showrooms
When 8 x 4 ft is enough
- Room doors
- Wardrobes up to 8 ft
- Furniture such as tables, consoles and units
- Panels with a deliberate horizontal groove design
Planning the panels
- Measure the wall height and width.
- Decide where vertical joints will fall, ideally aligned with features like the TV or bed centre.
- Ask your carpenter to lay sheets in sequence so the grain flows.
- Order a little extra for matching and cutting.
See the collection and prices for both sizes on our veneers page.
Frequently asked questions
What sizes do Luxe Veneers come in?
4 mm sheets in 8 x 4 ft and 10 x 4 ft.
Is 10 x 4 veneer enough for a 10 ft ceiling?
Yes, it covers a standard 10 ft wall height in one piece in most homes.
Have a question about veneers? Message us on WhatsApp or visit JTC Studio in Coimbatore, near Chintamani Signal, Monday to Saturday from 10 AM to 7:30 PM.
Jay Trading Company

